水性工业漆怎么使用 【上海斯鼎水性漆厂家】

How to use water-based industrial paint
Water-based industrial paint construction process: Plate shot blasting pretreatment → surface cleaning → pre-coating primer → drying → surface treatment → touch-up primer → coating transition primer → drying → water-based topcoat → drying → marking → handover . Acceptance method of water-based industrial paint 1. Thorough rust removal without filling or spraying. 2. The thickness of the greasy layer is not more than 3mm (refers to the area greater than 0.01 square meters). 3. The greasy layer has no cracking, blistering and falling off. 4. The corners are flat, smooth, and the transition is smooth. 5. The thickness of the paint layer is consistent, and there is no delamination and cracking. 6. Rubber parts, electrical circuits, decorative parts, glass and other non-painted parts are not stained with oil or oil mist. 7. No error spraying variegated colors. 8. Before applying primer, the chassis should be cleaned. 9. The gloss and texture of the same batch of products are consistent, and the color is consistent with the drawing requirements and the color palette confirmed by the company.

水性工业漆怎么使用
水性工业漆施工工艺 板材抛丸预处理→表面清理→预涂底漆→干燥→表面处理→补涂底漆→涂装过渡底漆→干燥→涂水性面漆→干燥→涂打标记→交验。水性工业漆验收方法 1、除锈彻底而无填腻或施喷。2、腻层厚度不大于3mm(指在面积大于0.01平方米范围内)。3、腻层无开裂、起泡、脱落现象。4、各边角平整、光滑、过渡园顺。5、漆层厚度一致，无脱层、开裂。6、橡胶件、电器线路、装饰件、玻璃及其他非油漆部位不沾油或油雾等。7、无错喷杂色。8、施喷底漆前，底盘处理清洁。9、同一批次产品的光泽、纹理一致，颜色与图纸要求及公司确认的色板一致。www.sisdin88.com